Hot, cold and cryogenic: choosing the right insulation system
The three insulation duties fail in completely different ways. Getting the system right starts with knowing which problem you are actually solving.
Insights
Insights
Practical writing on insulation, cladding, fabrication, shielding and shutdown planning.
Why cladding is the part of an insulation system that fails first
The insulation is rarely what goes wrong. It is the metal over the top of it — and almost always the detailing rather than the material.
Lead lining for diagnostic imaging: what a compliant installation involves
A shielded room is a specified quantity, not a lined one. The failures are almost always at the interruptions — penetrations, frames, and the gap…
Induction versus flame in institutional kitchens
At a few thousand covers a day, the argument stops being about cooking preference and becomes one about ventilation load, ambient temperature and…
Planning structural steel erection around a live plant
Erecting steel in an operating facility is not the same job as erecting it on a greenfield site. The constraints are the programme.
A practical checklist for insulation handover and inspection
By the time an insulation system is finished, the part that does the work is invisible. Which is why the inspection has to happen before that.
Browse by tag
Next step
Have a scope to price, or a plant to keep running?
Send us the drawings, the shutdown window, or just the problem. We will come back with a scope, a method and a number.